Kaitlin Ball Air Compressor September 09th, 2018 - 14:18:49
For tools that require greater pressure, or if you use multiple tools back to back, then you need a two stage compressor.
A rotary vane air compressor uses a rotor and a number of blades in radial slots in the rotor. I do not fully understand how this works, but it has something to do with the rotor turning and the blades sliding in and out of their slots as they keep contact with the housing wall. This somehow creates decreasing volume.
I looked over my options and soon settled on a 20 gallon portable air compressor that would not only adequately run this particular tool, but would also serve my needs going forward. You never know what use you might find for such a great machine. Being able to power up and use tools with pressurized air is clean, efficient, powerful, and fun.
All reciprocating air compressors throw out some oil with the air they compress. When the tank reaches its designed pressure limit, a switch will interrupt electrical power to the motor. Simultaneously, a certain amount of oily air will be released into the shop environment. You may see oil collecting on the wall behind the compressor and on the pump and compressor as well over time. This is not cause for alarm but periodic cleaning may be needed.
You cab always rely on the air compressor pump to address your needs. High pressure air is a precious resource, especially in industries because it is safe, convenient, clean and flexible. Industries have been relying in it for over a century.
Make sure that your air compressor pump is the most appropriate one for your tank. This way you can use your equipment to its fullest and to avoid accidents and injuries while working. It is important that you be able to identify which pump is the best for your nature of work, because there are many types of air compressor pumps available.