Jerri Murphy Air Compressor August 10th, 2018 - 10:54:07
You will need at least one regulator and a water trap in line before the regulator. These are not costly. A regulator allows you to set the correct air pressure for the tool you will be using (say, 80 PSI) instead of tank pressure (say, 175 PSI).
My familiarity with manufacturing hardwood furniture has taught me that about half the time involved in constructing each chair, table or cabinet is taken up with sanding. When you are trying to make a livelihood in the woodworking industry with hourly employees you must cut inefficiency to a bare minimum. This does not mean becoming a tyrant but, instead, removing any and all impediments that may be slowing construction, sanding and finishing.
Now, most of these you do not have to know anything about, but if you are a layman, you can clearly see that there is a lot more to compressors than first meets the eye. For general use with tools, an air compressor is most likely to be a reciprocating piston, a rotary vane or rotary screw compressor.
For tools that require greater pressure, or if you use multiple tools back to back, then you need a two stage compressor.
The most common is the piston compressor. This falls under the positive displacement compressors, which you can find in fractional to very high horsepower ranges. The positive displacement air compressor works by filling an air chamber with air and reducing the chamber volume.
Care to Shout Your Thoughts on Honda Air Compressor Honda Air Compressor Recall Honda Crv Air Compressor Problems Honda Gx160 Air Compressor Parts
Posts Related To Honda Air Compressor