Jerri Murphy Air Compressor August 10th, 2018 - 07:48:57
I like my life as a portable air compressor. If you own one of us, please treat it kindly. Keep it oiled, adjusted, well maintained, and take care not to set your saw down on its hose. If you do those simple things your compressor will be your friend for a very long time.
Compression not only produces heat but squeezes water out of the air which ends up in the tank. Tanks can rust internally over time and if this is not controlled, the rusted air tank can eventually explode causing considerable damage and even death. That is why it is really important to evacuate the tank of water regularly. Most air compressors come equipped with a drain valve at the lowest point of the tank. If you dont want to spray water all over the floor under the unit, you may want to consider piping it from the valve to another place such as under the floor or into a drain. Piped water will flow uphill into a sink because it is being pushed out of the tank by compressed air.
If you are planning to buy air compressor, here are some guidelines that you should follow to avoid common errors. There are many sites on the web, but you need to read airbrush compressor buyers guide first.
Air output of a compressor is expressed in standard cubic feet per minute (SCFM) or just cubic feet per minute (CFM). Not all 5 HP compressors put out the same volume of air per minute. This is a function not only of motor horsepower but also the efficiency of the air compressor pump the motor is powering. The higher the CFM, the less your air compressor will have to cycle on and off to keep up with the demands you are putting on it. A small compressor pump on a huge tank will produce no more air than on a small tank. The only difference will be in the number of times the compressor cycles on an off each hour and the time it takes to recompress the tank on each cycle. In the final analysis, you need to pay attention to SCFM (or CFM) more than you do motor horsepower or tank size. Air flow is the end product of any compressor and the CFM must be sufficient to the job at hand.
An important factor is also the factor of oil. The oil is used for lubrication of moving parts of the compressor, but it also has some side effects. For example, traces of oil can be found in the tubes that deliver air to your airbrush tool, so it can be mixed with paint. This problem is more pronounced if the compressor is older. One possible solution is to purchase an oil free air compressor.
Care to Shout Your Thoughts on Amazoncom Air Compressor Replacement Parts Tools Home Improvement Air Compressor Replacement Parts
Posts Related To Air Compressor Replacement Parts